Gas Safe registered · No. 932798 ★★★★★ 9.8 Checkatrade · 145 reviews ★★★★★ 4.9 Google · 312 reviews Company No. 12326959 24/7 · including bank holidays
Planned work · Manchester · from £2,400 per floor

Underfloor Heating Installation in Manchester

Wet underfloor heating runs at 35–45°C rather than the 70°C a radiator needs.

Underfloor heating installation in Manchester
No call-out feeNo night or weekend surchargeFixed price before we start12-month workmanship guarantee

which is why it pairs so well with a modern condensing boiler and why it is close to mandatory if a heat pump is anywhere in your plans. It also gives you back every wall a radiator was using.

What you get

Underfloor heating installation in Manchester: what the price includes

  • 01
    Screed, low-profile or between joists

    A new extension takes pipe in screed and performs best. A retrofit onto an existing floor takes a low-profile overlay of 15–20 mm, which affects door heights and thresholds. A suspended timber floor takes spreader plates between the joists. We survey before specifying, because the floor decides the system.

  • 02
    Heat loss calculated room by room

    Underfloor output is limited by floor surface temperature, you cannot simply turn it up. If a room's heat loss exceeds what the floor can deliver, insulation or a supplementary emitter is part of the answer, and it is far cheaper to know that now than after the screed is down.

  • 03
    Manifold, blending and zoning

    A blending valve drops flow temperature from the boiler circuit to the loop temperature, and the manifold balances each loop so no room runs cold. Zoned actuators and per-room stats are the difference between comfortable and expensive to run.

  • 04
    Pressure-tested before anything covers it

    Loops go in continuous, with no joints under the floor, and are pressurised and held before screeding or boarding. A leak found at that stage costs an hour. Found later it costs a floor.

  • 05
    Floor finish matters

    Tile and stone are ideal, engineered timber works within a temperature limit, and thick carpet or heavy underlay can insulate the system into uselessness. We will tell you the tog ceiling for your build-up before you order the flooring, not after.

What this means in Greater Manchester

Local conditions we work around

Manchester heating engineers deal with the opposite problem to London. With water this soft there is effectively no limescale, so heat exchangers stay clean and boilers reach their expected life. What we see instead is corrosion: soft water is mildly aggressive to older copper and steel, so system sludge, pinholed radiators and failing cylinder coils are the common findings. That makes inhibitor levels and a magnetic filter matter more here than a scale reducer ever would.

Where we do this in Manchester

Covered across Greater Manchester

Same published rate card and the same twelve-month workmanship guarantee everywhere below, there is no postcode loading. Each area has its own page with an arrival time taken from our job records rather than chosen for a website.

Straight answers

Underfloor heating installation in Manchester, your questions

Can I retrofit underfloor heating without lifting the floor?
Yes, with a low-profile overlay system of 15 to 20 mm plus the finish. It raises the floor and needs doors trimmed and thresholds reworked, but it avoids excavation. On a suspended timber floor the alternative is spreader plates from below, which avoids raising anything.
Is underfloor heating expensive to run?
Wet underfloor is generally cheaper to run than radiators for the same comfort, because the lower flow temperature keeps a condensing boiler in condensing mode. Electric mat systems are the opposite and are best kept to a single bathroom.
How long does it take to warm up?
A screed floor has real thermal mass, so it takes hours rather than minutes and is designed to run steadily rather than be switched on and off. Overlay systems respond much faster. Which one you have should shape how you set the controls.
Does it work with a heat pump?
It is the ideal pairing. A heat pump is most efficient at low flow temperatures, and underfloor is a low-temperature emitter. If a heat pump is anywhere in your ten-year plan, underfloor now makes that conversion straightforward later.
Can I have it in one room only?
Yes, bathrooms and kitchens are the common single-room jobs. It runs as its own zone off the existing system with its own blending valve and stat.
How does Manchester soft water affect heating work?
It reverses the London problem. With no meaningful scale, heat exchangers stay clean and boilers reach their expected life. What we find instead is corrosion, soft water is mildly aggressive to older copper and steel, so system sludge, pinholed radiators and failing cylinder coils are the common findings. Inhibitor levels and a magnetic filter matter far more here than a scale reducer ever would.
24 hours · 365 days · Manchester

Water where it
shouldn't be? Call.

A person answers, not a menu. You'll have an arrival time and a price range before you hang up.

020 3674 8514

Or WhatsApp 07865 292684, photos help us bring the right parts

Our engineers