Radiators, Heating Pipework and Hot Water in London
Booked around your diary, at one hourly rate.
Radiators, heating leaks and pipework, power flushing, underfloor heating, unvented cylinders, cold water tanks, and immersion and electric water heaters. Everything here is charged at the same hourly rate, plus parts. Gas work is not something we do, so boilers and other gas appliances are not part of it.
Local conditions we work around
Hard water is the defining fact for London heating. At 280 to 320 ppm, scale builds on the hottest surfaces in the system, and every millimetre of it costs efficiency and shortens the life of the parts it coats. It is why we fit a scale reducer on the mains where the system warrants it, and why an unvented cylinder in London needs its annual service rather more than the manual implies.
Services
Central Heating Repair in London
Cold radiators with a hot boiler is a circulation problem, air, sludge, a stuck valve or a tired pump.
Radiator Installation in London
New radiators, moved radiators, bigger radiators for the room that never warms.
Power Flush in London
Sludge is dissolved radiator steel, it settles, insulates and slowly strangles the system.
Unvented Hot Water Cylinder Installation in London
Mains-pressure hot water at every tap, no loft tank, showers that feel like showers.
Water Heater Repair in London
Water heater repair in London for immersion heaters, electric point-of-use units and instantaneous heaters.
Water Heater Installation in London
New hot water where you need it: under-sink and point-of-use heaters, electric multipoints and immersion cylinders.
Cold Water Storage Tank Maintenance in London
Loft tanks feed millions of older systems and are ignored in all of them.
Underfloor Heating Installation in London
Wet underfloor heating runs at 35–45°C rather than the 70°C a radiator needs.
Questions people ask
Do you repair, service or install boilers?
No. We do no gas work, so anything on a boiler or other gas appliance needs a heating engineer. If you smell gas, call 0800 111 999.
Will you register the work?
Yes. Unvented cylinder work is notified under Part G. You get the certificates, and they matter when you sell.