Due to the variety of water plumbing methods in the building this time we intend to continue with how to plumb the building from top to bottom in this article to determine the best building plumbing method.
first of all, we explain the different methods of water piping in the building.
also, we will examine the strengths and weaknesses of each.
Click on it to see how the building is plumbing.
Traditional water piping:
Water piping has traditionally been used in building construction, and it can be said that most buildings used to be piped in the past. At that time, most metal pipes were used for plumbing the building’s water.
But for reasons such as high installation costs due to hard work, long-term rusting of the pipes, and heavy metal pipes, they are no longer used in building water piping.
In water plumbing, the water pipe splits across the entire building from the main riser, and there is no difference in how hot and cold water is plumbed. In this method, the main pipe is used directly after the meter is installed inside the building after it has entered the street.
The main use of indoor water risers in the branching method is that for each consumption point a branch is taken from the pipe and in the end the whole pipeline route is connected.
That is why this type of plumbing is called branching. Nowadays, plumbing is done after the use of metal pipes with the help of polymer tubes is obsolete.
Best Building Plumbing 1
Sample of branched plumbing with the help of polymer tubes by our expert team
For hot water piping, a branch of the main riser enters the thermal device and drains the hot water out of its outlet.
This was a general description of branching plumbing. Now, the shape of the branched pipes is divided into two categories according to the branch plumbing. Branched plumbing and Branched plumbing.
In fact, we can say that the best method of building plumbing in the split method is based on these two models.
If the pipes pass through the main riser from under the building material, the plumbing shape will be built in, and yet this type of plumbing cannot be implemented in residential buildings without carving.
However, if the hot and cold water pipes are radiated onto the outer surface of the wall, the piping procedure will be in the form of a surface.
The reason for this type of collector is named collector because of the use of a collector device in this model of water plumbing in the building.
This type of plumbing is modern and advanced and does not abide by the traditional plumbing laws. Because unlike split plumbing, this model of plumbing can also be run on a single building.
In the previous article, what buildings do we use as collector plumbing? We have detailed explanations for using this method, which you can also read on this site.
In this way, the main water riser enters the collector after entering the street into the building where the collector is to be plumbed. It is then used in different locations as needed. In this way, the main riser is split inside the collector.
The number of collectors inside the building varies by a number of places of consumption.
Collectors are available on the market with a number of different outputs and inputs.
We have included more comprehensive information in the collector’s article.
Now, apart from the variety of collector models, we need at least two separate collectors for hot and cold water plumbing in building water piping.
Because the main water regulator does not directly enter the heat exchanger, we need a separate collector to split the hot water pipe out of the package between the heat exchangers, such as radiators.
Unlike traditional plumbing or branch plumbing, the collector cannot be lined up, as the tubing is only built-in after leaving the collector box, but in this way, the pipes can be in two different states Built-in drawings in the building.
In some buildings, pipes pass through the floor like a branch pipe, but in more modern buildings the collector piping method is applied subcutaneously, that is, the pipes of a building pass under the upper floor.
Best Building Plumbing 2
An example of a collector plumbing whose pipes are also directed under the roof by our co-workers
The best way of plumbing a building can be found by examining factors such as the speed of execution, cost of work, quality of work and maintenance of water plumbing in the building. Of course, the shape of the structure is also very important in finding the best piping method.
The form of the structure means that the building is under construction or is in residence.
This important factor plays an important role in choosing the type of plumbing for a building that cannot be easily overlooked, especially if you are planning on plumbing on a separate floor.
Conclusion for the best method of building plumbing:
From the above, we can conclude that:
- The best way of plumbing your building can be different.
- The best method of plumbing in a building is determined by the type of building structure
We just tried to give information about :
the types of water piping in the building, and the advantages and disadvantages of each.
Hopefully, we’ve been able to help you make the right choice for your building type.
If you would like to know more about how to use water piping in buildings, please contact us
Finally, we refer to a corner of the services provided by our partners in the 24-hour facility group.
In a project under construction, our colleagues used a five-layer collector piping.
A separate collector was also installed in the building to run the boiler
The five-layer hot-water piping in the building is used as a floor plan.
Follow us on Instagram
finally, Plumbing Services
- another, Airlocks
- Basement Flood Clean-Up
- Bathroom Refurbishment
- Bidet installation and Repair
- Blocked Toilets, Sinks, Pipes & Drains
- Burst Pipe Repair
- Hidden plumbing leaks
- Home Plumbing Service
- Hot Water Cylinder Installations
- Hot water problems
- Immersion Heaters
- Kitchen Refurbishment