piping building water from top to bottom

By in
55
piping building water from top to bottom

How to pipe building water from top to bottom! One of the new ways to implement a water riser in a building is from top to bottom. That’s why we’re going to talk about building plumbing in the rest of this article. Join us for tips on piping building water from top to bottom.

1- How to pipe building water from top to bottom:

This method of plumbing, as mentioned, is a new method in building water plumbing. In this way, after directing the water to the meter, we direct the water riser directly and without stopping on different floors of the building to the top of the roof of the building.

Also, after the water riser reaches the top of the roof, we return the pipe to the bottom with the help of U-shaped connections. As a result, contrary to the method of plumbing building water from the bottom to the top, this time we divide the main pipe from the top to the bottom into the required number of floors in the building.2- How is the water piping inside the building done in the building water piping method from top to bottom?

2- How is the water piping inside the building done in the building water piping method from top to bottom?

The way water is piped inside a building in a top-down manner is similar to water piping in a building from the bottom up. Also, inside the building, according to the building plan, the type of materials, and people’s tastes, any method of water piping can be used.

As you know, the plumbing method inside the building can be applied in branching and collector forms. In building water piping, from top to bottom, the riser pipe can be inserted into the collector above the roof after coming down. As a result, after entering the water pipe into each unit, the collector method can be used.

Cold and hot water pipes also branch from the same riser. Therefore, after entering the riser pipe into each floor, you can first insert the pipe into the collector. It was then branched out to meet the need for hot and cold water.

Water piping inside the building from this part onwards is quite tasteful. In this way, you can connect them to the collector for piping inside the building. Then, after connecting the pipes to the collector, he executed them through the internal plumbing of the building water. You can also do this as a built-in floor and wall plumbing or as hot and cold water plumbing under the roof.

If you use the branching method in building water piping from top to bottom. You can steer the pipe along with each unit after the main pipe branch enters each floor. As a result, run hot and cold water for each area in parallel in each area.

In this method, the method of internal water piping in the building can be done in the form of surface piping or built-in piping.

3- Important and necessary points in the implementation of building water piping from top to bottom:

It is necessary to use a water pump on the ground floor in case of low urban water pressure entering the building in order to increase the power and water pressure to move along the pipe.

If the water pressure in your area is high, you can install a water storage tank on the roof in addition to storing water, increase the power and speed of water inside the building’s water pipes to a high degree. So you no longer need to use a water pump at the bottom of the building.

Use water-resistant and high-quality riser so that it does not leak or settle in the long run. We also recommend using a polymer-based riser.

The important thing about building water plumbing is about the diameter of the pipe. In this way, as we move from the meter to the consumption points, the diameter of the water pipe must change from large to small.

4- Advantage of building water piping from top to bottom in comparison with building water piping from bottom to top:

One of the biggest advantages of building water plumbing from top to bottom is the ability to access high-pressure water compared to plumbing water from the bottom to top. Explaining that in water piping from the bottom to the top, it is possible to reduce the water pressure on the upper floors due to gravity.

Gravity absorbs the speed and power of water moving in the pipes. However, in plumbing, the building’s water branch branches up and down as the water from above splits between the floors! so gravity acts as a helper to move the water in the pipes.

Ability to run water cooler water piping due to the availability of water riser on the roof
Possibility to install a home water pump on the roof:

One of the limitations of installing a domestic water pump on the roof is that the water riser in the building is of the ascending type. Therefore, the water plumbing work would be very difficult and complicated after installing the pump on the roof.

While another downside of the descending riser is this: You can easily install a home water pump on the roof. Also, the water will be quickly pumped from the top to the bottom by the pump.

2- How is the water piping inside the building done in the building water piping method from top to bottom?How to place risers:

  • first, in all, Razors are usually located in the middle of the building’s interior walls.
  • more than, The risers must be protected from any other risers for each part.
  • The most important protection for water and sewer risers should be considered to prevent water and sewage from merging in the building.
  • Another important protection is water and electric riser. They must be used completely separately and covered in the building. There is no risk of electric shock to residents in the event of a leak and a burst water riser.
  • According to some building codes, risers should not be used in places such as elevator shafts and building electrical rooms.
  • Another important factor in how to place risers is to consider the appropriate slope in the riser pipes.
  • Water riser pipes, because they have to move the volume of water and sewage flow, must be installed along with the building with a suitable slope so that the speed of fluid transfer is not high or low.

Endpoints

Our final recommendation to you is that even if all the conditions are favorable in terms of power and speed of water and the height of the building, still consider the water storage tanker on the roof.

After rising in the riser, the water first enters the water tank at the top of the roof and then flows from top to bottom between the floors.
We install water storage at the top of the roof.
The cost of installing a tanker or water storage source on the roof is incomparable to the comfort of the building’s occupants.
For more information on installing a water source, you can contact the article on installing and plumbing a water source at home and on the roof.

As explained, building plumbing from top to bottom,

in addition to being specialized,

must be done by experienced people to provide all the necessary support,

such as a water pump and water storage tank,

to supply water pressure inside the building.

Leave a reply

Your email address will not be published. Required fields are marked *